HUSQVARNA® VIKING® Button Presser Foot

sku 412934545
26305_HV_Accessory_Catalog_412934545_Button_Foot_with_Placement_Tool-1800x1800-1.jpg
Out of Stock
$42.39

$52.99 MSRP

While sewing on buttons, this foot raises the button slightly off the fabric to give a slight thread shank. This makes buttoning easier and prevents the button from being sewn on too tightly.
Find a Store

Free Shipping on Machines and orders over $35

Details

While sewing on buttons, this foot raises the button slightly off the fabric to give a slight thread shank. This makes buttoning easier and prevents the button from being sewn on too tightly.

 

Compatible with HUSQVARNA® VIKING® machine groups: 1-9.

 

*Not compatible with the EMERALD™ series, EDEN ROSE™ 250M, TRIBUTE™ 140M, 145M. ONY X™ series.

Additional Features
  • Quickly sews on buttons
  • Perfect results, never too tight
Specifications

How to Use:

1. Thread with matching sewing thread on top and in the bobbin. Snap on the Button Foot. Press presser foot extra lift if available on your machine to make attaching the presser foot easier.

 

2. Slide the Retractable Thread Shank Guide into the desired position. All the way back will give you no thread shank. The first position will give you a shorter shank for lightweight fabrics. The second position (all the way forward) will give you a longer thread shank for heavier fabrics.

 

3. For a button smaller than 1/4” (6 mm), use the Placement Tool. Insert the Button Placement Tool into the holes of the button. Note: Avoid using a button higher than ⅛"" (3 mm).

 

4. Insert the Button Placement Tool with the button in place into the slot in the foot. The button will automatically be placed in the correct position for sewing.

 

5. Remove the Button Placement Tool.

 

6. Select “Button Sewing” on your SEWING ADVISOR™ feature. Adjust the Stitch Width if necessary according to the width between the holes in the button.

 

7. Sew on your button following the instructions in your User’s Guide.

Machine Compatibility