HUSQVARNA® VIKING® Dissolve-a-Way Plus Stabilizer 12 Inches x 10 Yards

sku 920773096
31430_HV_DISSOLVE_A_WAY_PLUS_920773096_TRANS-1800x1800-1.jpg
31430_HV_DISSOLVE_A_WAY_PLUS_920773096_TRANS-1800x1800-1.jpg
$26.99

$35.99 MSRP

Find a Store

Free Shipping on Machines and orders over $35. Free returns through January 2025.

Heavy-weight water dissolvable film topping for heavier stitch counts or heavier thread weights.
Details

Husqvarna® Viking® Dissolve-A-Way Plus Stabilizer has a heavy-weight water dissolvable film topping for heavier stitch counts, heavier thread weights or stabilizer-only hoop embroideries. It can be used as either a backing or a topper and is great for embroidery projects like 3D appliqué, cutwork, embroidery on towels and other applications where it is desirable for the stabilizer to be removed completely.

Specifications

Recommended uses:

Dissolve-A-Way Plus used as a topper keeps the high nap or loft pile fabrics from peeking through embroidery stitches and adding a flatter surface for stitches or embroidery. It’s a must for heavier weights of terry cloth, corduroy, and fleece. Heavy stitch count or using heavier weight threads requires a heavier topper weight to maintain coverage. Improves embroidery applications on uneven surface such as Pique knits, course weave fabrics, “bumpy” fabrics or textures such as ribbons, yarns, thick threads or woven fabric strips. Use as stabilizer-only in the hoop for fine lace embroidery, multiple fabric layer appliqué, or 3-D thread/yarn decorative stitched pieces.

Instructions:

As a Topper:


  1. Method One is to place Dissolve-A-Way Plus on top of fabric then hoop normally and embroider.
  2. Method Two is to hoop fabric first, place piece of Dissolve-A-Way Plus on top, secure with basting stitch before beginning embroidery process.

As a Stabilizer:


  1. For higher stitch count lace designs, heavier thread weights, appliqué or 3-D texture piece, hoop 1-2 layers of Dissolve-A-Way Plus stabilizer.
  2. Pull stabilizer edges gently to tighten and secure in hoop. Be careful not to stretch film as you tighten.
  3. When completed, tear away as much of the film as possible. Removal of remaining is best in a warm water bath, soaking for 10 minutes. Move item around in water continuously. Repeat until completely removed. Rinse in warm water. Dissolve-A-Way Plus can be removed also by medium to heavy steam or moisten and blotted away with a wet sponge.
  4. Place item on flat surface until thoroughly dry.