PFAFF® Stitch-In-Ditch Foot for IDT™ System

• The needle hole in the foot is oval shaped, allowing you to adjust the needle position
• For pieceing, move the needle to the right to decrease the seam allowace to the to left to increase it
• For topstitching, use the guide to precisely position your stitching on blocks, garments or home decore projects

1. Attach the Stitch-in-Ditch Foot.

2. Engage the IDT™ system.

3. Select a straight stitch (or another stitch that has a centered needle position like the reinforced straight stitch or the straight stitch hand look quilt stitch).

4. Place the quilt under the presser foot with the guide in the seam (ditch) of the pieced quilt patches.

5. The guide of the presser foot will follow exactly in the center of the pieced seams so you can quilt perfectly.

Note: With any of the Stitch-in-Ditch feet for IDT™ system attached to machines with manual presser foot lift we recommend not to lift the presser foot to the extra high position. This can cause the needle holder to touch the guide on the presser feet. With the needle set to down position we recommend just to lift the presser foot as much as needed for pivoting so that the fabric can be turned freely.