HUSQVARNA® VIKING® Aqua Magic Wide Stabilizer 20 Inches x 10 Yards

sku 920763096
31422_HV_AQUA_MAGIC_WIDE_STABILIZER_920763096_TRANS-1800x1800-1.jpg
31422_HV_AQUA_MAGIC_WIDE_STABILIZER_920763096_TRANS-1800x1800-1.jpg
$27.27

$38.95 MSRP

Find a Store

Free Shipping on Machines and orders over $35 (Excludes AK & HI) Free returns through January 2025.

Husqvarna® Viking® Aqua Magic is a soft fabric-like stabilizer that dissolves easily in water and will leave your project soft and pliable, not stiff.
Details

A Soft Fabric-Like Stabilizer That Dissolves Easily In Water

Husqvarna® Viking® Aqua Magic is a soft fabric-like stabilizer that dissolves easily in water. Aqua Magic is ideal for any application that requires 100% of the stabilizer to be dissolved away. Because Husqvarna® Viking® Aqua Magic stabilizer rinses away completely, it will leave your project soft and pliable, not stiff.

Specifications

Recommended uses:

This is a must for those beautiful all-yarn decorative stitched scarves. The adhesive holds in place ribbons, yarns, fabrics and any other creative materials you would like to hold in place.

It can be substituted for applications requiring sticky-type stabilizer, such as small items not fitting in a hoop or “hoop-less” embroidery with the added benefit of all stabilizer dissolving away.

Perfect for light to medium weight wovens, light to medium weight knits – including “slinky” knit, batiste, organza, organdy, chiffon, tulle, netting, towels/terry cloth, minkee and polar fleece.

Instructions:

1. Cut Aqua Magic Plus stabilizer large enough to fit in hoop (hoop dimension plus at least 1” on all four sides).

2. Hoop with paper side up, score release paper with an X using a needle or pin. Peel back paper to expose the tacky surface.

3. Place article to be embroidered, with right side up, in center of exposed sticky surface.

4. To make yarn or ribbon scarves, lay the ribbons and yarns on the sticky surface and then cover with a water dissolvable film prior to embroidering.

5. When completed, cut away outer edge and submerge in plenty of warm to hot water.

6. Move item around continuously to remove all stabilizer fibers.

7. Keep submerged in hot water bath for 10 minutes. Rinse thoroughly with very warm water.

8. Repeat process if needed for dense stitching or heavier fabrics. In case of hard water, use a water softener or distilled water for improved dissolvability.

9. Place item on flat surface until thoroughly dry