HUSQVARNA® VIKING® Fusible Whisper Web Mesh Stabilizer 12 Inches x 10 Yards

sku 920771096
HV_FUSIBLE_WHISPER_WEB_MSH_920771096_ALTVIEW_TRANS-1800x1800-1.jpg
HV_FUSIBLE_WHISPER_WEB_MSH_920771096_ALTVIEW_TRANS-1800x1800-1.jpg
25%OFF
$31.46

$41.95 MSRP

Find a Store

Free Shipping on Machines and orders over $35 (Excludes AK & HI) Free returns through January 2025.

Husqvarna® Viking® Fusible No-Show Mesh is a semi-sheer textured polyester iron-on cut away stabilizer designed to eliminate the bulk, stiffness and show through of a stay-in stabilizer. No messy spray adhesives or glues needed!
Details

A Semi-Sheer Textured Polyester Iron-On Cut Away Stabilizer Designed To Eliminate The Bulk, Stiffness And Show Through

Husqvarna® Viking® Fusible No-Show Mesh is a semi-sheer textured polyester iron-on cut away stabilizer designed to eliminate the bulk, stiffness and show through of a stay-in stabilizer. It is used as a permanent backing and is ideal for garments and fabrics with stretch as well as applications that will be close to the skin. The translucent nature of this stabilizer eliminates the bulk, stiffness and shadowing characteristic of other types of permanent stabilizers. Husqvarna® Viking® Fusible “No Show” Mesh stabilizer is applied to the back of your fabric prior to hooping, preventing distortion during the hooping process. No messy spray adhesives or glues needed!

Specifications

Instructions:

1. Cut a piece of Fusible No-Show Mesh large enough to fit in hoop (hoop dimension plus at least 1” on all four sides). The shinier side of No-Show is the fusible side.

2. Position the fusible side on the wrong side of fabric area for embroidery. Fusible No-Show Mesh irons on with the iron set between medium and high. (Use appropriate heat for type of fabric being ironed.)

3. Press to fuse in place. Since this will be peeled back when completed, it does not require a permanent bond.

4. Position fabric and stabilizer in hoop. Hoop fabric; tighten without pulling or stretching. If needed, add a second layer of No-Show Mesh or a light tear away for the higher stitch count designs.

5. Stitch the embroidery.

6. When the embroidery is finished, trim away excess No-Show Mesh, leaving about ¼” on outside edge of embroidery design.

7. Follow fabric recommendations for machine washing, dry cleaning and pressing.